- Application: Loading Arms and Hoses (Aviation, Oil, and Gas
Loading/ Unloading Applications).
- Size: 2" to 4" and larger, available in style 20F (Flange Ends)or
Threaded-ends or combination
in ANSI 150 or 300 lbs. pressure rating,
- Material
of Construction:
CF8 / CF8M
with SS 304/316 internals (complete stainless steel assembly), or
A 216 WCB (carbon Steel) with SS 304/316 internals, or
B 26-356-T6 (Aluminum ) with SS 304/316 internals
- Seals: Buna-N,
Viton ®, PTFE and others
- Operates at
pull in almost all angles and prevent damage to loading/ unloading system.
- Easily reassembled in site by replacing Shear pins.
- Minimum or practically no spillage on dis-connection.
- No additional system required for operation.
- Absolutely low pressure drop at rated highest flow rate.
- Can be used with unloading hoses and will operate to prevent hose
failure and product loss.
- In-built gasket in flanges can be provided to eliminate use of other
gaskets during installation and require low torque for tightening of
bolts.
- No maintenance required. Free-spares supplied for immediate maintenance.
- Hydro-testing
and Special Testing: All couplings are Internal Hydro-tested at
shop before shipping. A special breakaway test is available upon special
request.
- Intrinsically safe proximity switch disconnection indicator
can be supplied for immediate information in control room.
Viton® regd. Trade-mark of DuPond.
|
