1. Position
Indicating System for Top Loaders
2. Anti-Overspill (Magnetic Reed
Switch and PTFE Float Assembly for Top Loading Arm)
3. Loading Valve: (Ball Valve)
4. Torsion Spring Balance Assembly
and Counter-Balance Assembly
5. Locking Arrangements for
Parking and Filling Positions
6. Safety Break-Away Coupling
for LP Gas Loaders and other applications
7. Vacuum Breakers
1. Position
Indicating System for Top Loaders
 |
Mercury
Switch
- For
Top Loading Arm.
- Provides automatic
shut-off of the pump.
- Intrinsically
safe power supply
|
2. Anti
-Overspill System
(Magnetic
Reed Switch and PTFE Float Assembly for Top Loading Arm)
 |
- Size: 2", 2 1/2" , 3" and
4" Drop Tube of Top Loading Arm.
- The Anti - Over Spill
System (AOS-2000) provides automatic shutoff of the pump when
the liquid being loaded reaches a pre-established level.
- 170 mm (approx.) sensor Length
- Sensor mounted in loading arm drop tube
- Intrinsically safe power supply
- Plug and Play - No adjustment required
|
3. Loading
Valve: (Ball Valve)
|
Photo Coming Soon
|
Ball Valves: Full-Bore type, const. in CS, SS and Aluminum and combinations (up to
4") with different end-connections (std. is flange-ends). |
4. Balancing
Assemblies:
1. Compression Spring Balance Assembly
2. Counterbalance Assembly
3. Torsion Spring Balance
Assembly
Double
Spring Balance Assembly
|
- Double Spring Balance Assembly
(Lifting
range of 45-78 MKg)
- Single Spring Balance Assembly
- Double-Double Spring Balance
Assembly (Heavy Duty)
- Complete Sp. bal. assembly
also available in Stainless Steel material for low temp.
application
|
 |
Single
Spring Balance Assembly
|
5. Locking
Arrangements:
1. Parking Position Lock
2. Filling
Position Locking System
|
|
|
Parking Position Lock:
A positive locking system that
prevents undesirable and random movements of the loading arms.
Also referred as a Base Swivel Joint Locking System.
|
|
Filling Position Locking System:
For avoid back pressure flashing incidents while top
loading, available a simple positive locking system for top loading arms that prevents
potential flashing incidence that could cause personal injury, equipment damage and
subsequent product loss.
|
6. Safety
Break-Away Couplings for Aviation, Oil, and Gas Loading/
Unloading Applications
|
Size: 2" x 300 lbs.
|
Investigation of drive-away incidents involving LP Gas Loading/
Unloading arm assemblies has led AE to develop protective break-away
couplings that, if separated, quickly form an air-tight pressure
seal that prevents LP gas from loading arms or tank trucks from
escaping through the separated coupling half and spilling to
the ground. Subsequent R&D efforts have resulted in the
manufacture of `ASSEN' Safety Break-Away Couplings (SBAC) utilizing
shear-pins that are:
Available in 50mm (2") to 85mm (4"), and larger
sizes
ANSI Class 300 and Class 150
Available in Stainless Steel, Carbon Steel and Aluminum
Available with seals of Buna-N, Viton®, and Teflon®
Flange-ends, Threaded-ends and combinations
Simply constructed for ease of reassembly after separation
without special tools
(For more detailed information, click here)
|
7. Vacuum Breakers
for Top Loaders
Return
to Top and Bottom Loading Arms
Return
to LP Gas Loaders
Return
to Product and Services
For more information / quote
please e-mail or fax your request to
sales@associateengineers.com
Fax: (91 265) 2580249 / 2335731
Associate Engineers, India
|
