• Application: A permanent and/or temporary pipe leak repairs/maintenance for the Hydrocarbon, Steamlines, Petrochemical, and Cross-country Pipelines

• Size: API Pipe (2" to 48") 50 mm to 1200 mm NB and larger, (special pipe bend clamp and T-clamp are also available)

• Class: Standard 1000 psig (ANSI 400), ANSI 600, and ANSI 900 pr. rating; Designed per section 3 of API 6H

• Material of construction: Carbon Steel, Stainless Steel, and combinations
     CS: A515/516 Gr.60/70 (body) -A105(stiffener), SS304/ 316 and combination;
     (complete assembly stress-relived after stiffeners welding and before machining)

• Single piece precision die moulded seal fixed in WEDGELOCK GROOVES in each half for peripheral and lateral sealing. The single-piece seal has proven superior to the conventional four-piece seal and does not require seal holder

• Seal width: Standard (5"and 8") and special longer widths up to 30"

• Seal material: Buna-N, Viton®, Neoprene, and EPDM.
     (the standard and special longer seal widths available in all listed materials).

• Over-all-length: Standard (11" to 14") and special longer widths up to 40"

• Heat insulating code: Provided to avoid any seal demage during the welding.

• Designed to withstand temp. from minus (-)100^° to +350^° deg. centigrade,
  (for high or low temp. application, consult AE for proper sealing/clamp material)

• Hinge-and-rod assembly and lifting-lugs are available for easy installation

• Vent/sealant plug: Vent plug for welding fumes during welding and sealant plug are available

• Carbon equivalent stamp punched on clamp-body and stiffeners for welding

• Storage instruction: Storage instruction labels in English and/or other languages are permanently attached to the clamp.

• Hydro-testing and special testing: All leak repair clamps are internally hydro-tested as per API 6H specs. (1.5 time pressure hold up to 30-60 minutes) at AE’s shop before shipping, and special fire-tests are also available

• Two Piece assembly: ready-to-use (including seal installed in each half)

• Documents provided for the product support: (as requested)
  1.  Manufacturer’s Test Certificate
  2.  Material Test Certificate
  3.  Third Party Inspection Agency Certification
  4.  Stress-Relief Certificate
  5.  Technical Manuals (TM): Site Installation; Welding Instruction;
       Hydro Testing Instruction and Replacing Seals Instruction
  6.  Quality Assurance (QA/QC) TM Manuals
  7.  Research and Development projects for the clamps

Return to On-Line Leak Repair Clamps